Magnets > Grade > AlNiCo 5

magnet, SmCo 5, round, 0.187'' x 0.250''

(Revision: 0) magnet, AlNiCo 5, holding assembly, 1.250'' diameter x 1.000'' long - tapped hole 1/4''-20

magnet, AlNiCo 5, holding assembly, 0.750'' diameter x 0.500'' long - tapped hole #10-32

magnet, AlNiCo 5, holding assembly, 0.375'' diameter x 0.750'' long - tapped hole #8-32

(Revision: 0) magnet, AlNiCo 5, ground rod, 0.250'' diameter x 6.000'' long (bulk pack)

magnet, AlNiCo 5, round brass sleeved holding assembly, 0.375'' diameter x 0.750'' long

magnet, AlNiCo 5, holding assembly, 0.375'' diameter x 0.500'' long - tapped hole #8-32

Tank Cleaner Mag 45# - Tank Cleaner Magnet, Magic CLEAN-OUT TOOL A permanent Neoprene covered alnico 5 magnet attached to a 48'' wooden handle w/d...

Base Magnet 1-5/16x2-3/16 - Base Magnet Alnico 5 Neoprene Covered, 1 15/16'' x 2 1/2'' with 1/4 Thru Hole for Mounting, 45# Plus of Holding Capacity.

(Revision: 0) magnet, AlNiCo, round holding assembly, 2.125 dia x 1.25 long. 8-pole - brass encased - dwg: E 1341

magnet, AlNiCo 5, round horseshoe, 1.375'' x 1.375''

magnet, AlNiCo 5, horseshoe, 0.562'' x 1.625'' x 1.500'' - C type (bulk pack)

magnet, AlNiCo 5, holding assembly, 0.750'' diameter x 1.250'' long - tapped hole #10-32

magnet, AlNiCo 5, rotor, 1.250'' diameter x 0.750'' long - 6-side-pole - 30 degree angle - as cast - 24 lbs holding value

magnet, AlNiCo 5, rotor, 1.000'' diameter x 0.750'' long - 4-side-pole - 45 degree angle - as cast - 16 lbs holding value

magnet, AlNiCo 5, holding assembly, 0.375'' diameter x 1.000'' long - tapped hole #8-32

magnet, AlNiCo 5, pot magnet, 0.688'' diameter x 0.625'' long - tapped hole #10-32

magnet, AlNiCo 5, holding assembly, 1.000'' diameter x 0.750'' long - tapped hole 1/4''-20

magnet, AlNiCo 5, round brass sleeved holding assembly, 0.187'' diameter x 0.375'' long

magnet, AlNiCo 5, holding assembly, 0.625'' diameter x 0.500'' long - tapped hole #10-32

magnet, AlNiCo 5, round brass sleeved holding assembly, 0.125'' diameter x 0.500'' long

magnet, AlNiCo 5, round brass sleeved holding assembly, 0.375'' diameter x 1.000'' long

magnet, AlNiCo 5, holding assembly, 0.375'' diameter x 0.625'' long - tapped hole #8-32

magnet, AlNiCo 5, round brass sleeved holding assembly, 0.187'' diameter x 0.750'' long

magnet, AlNiCo 5, pot magnet, 0.500'' diameter x 0.500'' long - tapped hole #10-32

magnet, AlNiCo 5, round horseshoe, 1.000'' x 1.000''

magnet, AlNICO 5, round horseshoe, 0.875'' x 0.875''

magnet, AlNiCo, hex assembly, 1.250'' x 1.250'' - with 3/8''-16 stud - dwg: E-1288